Home Chi siamo Metalli non ferrosi Rame Alluminio Ottone Zinco Piombo Acciaio inossidabile Motori e rottame misto Vendere rottami Contatti Richiedi un prezzo

Ottone

Trattiamo l'intera gamma di ottoni e bronzi — composizioni gialle, semirosse e rosse, trucioli, bossoli, tubo e pani secondari — valutati sul reale contenuto di rame e zinco.

Lo standard MohMet

Ottone e bronzo, valutati sulla composizione reale

Ogni qualità di ottone è definita dal rapporto rame-zinco, spesso con preziose aggiunte di stagno e piombo. L'ottone giallo si aggira sul 65 % di rame; l'ottone rosso sale all'85 % con stagno e piombo in lega. Valutiamo ogni spedizione sulla sua composizione reale — e dove un bronzo non ha un codice ISRI pubblicato lo trattiamo su analisi, così che entrambe le parti recuperino l'intero valore della lega.

In questa pagina Honey Ivory Label Noble Ebony Parch Engel Grape Bronze & Gunmetal Night Nomad Erin Lace Lady Melon Pales Pallu Brass Ingot

Avete materiale da movimentare? Ecco come vendere rottame di ottone nel Regno Unito.

Catalogo delle qualità

Qualità di Ottone che trattiamo

18 qualità e forme nella gamma ottone.

A

Yellow brass

4 qualità
Grade 01

Honey

ISRI Yellow Brass Solids · ~65% Cu / 35% Zn

Detto ancheYellow brass · Brass solids · Mixed brass

Honey is yellow brass scrap: castings, rolled sections, rod, sheet, tube and plumbing fittings in yellow brass composition, nominally 65% copper and 35% zinc. Shipments must be free of manganese-bronze, aluminium-bronze, iron and heavily plated material beyond agreed limits.

Specification

  • Composition ≈ 65% Cu / 35% Zn (C26000 family)
  • Free of Mn-bronze and Al-bronze
  • Plated material within agreed limits
  • No iron attachments or non-metallics

Typical outlets

  • Brass ingot makers
  • Rod mills
  • Plumbing fittings
  • Hardware casting
Grade 02

Ivory

ISRI Yellow Brass Castings

Detto ancheBrass castings

Ivory is yellow brass castings: cast yellow brass hardware, valve bodies and fittings, free of iron, aluminium and manganese bronze. A consistent ingot-maker feed traded on yellow brass composition.

Specification

  • Cast yellow brass ≈ 60-65% Cu
  • Free of Mn/Al bronze and iron
  • Plating within agreed limits
  • No non-metallic attachments

Typical outlets

  • Brass ingot makers
  • Foundries
  • Hardware casting
  • Rod mills
Grade 03

Label

ISRI New Brass Clippings

Detto ancheBrass cutts · New brass clippings

Label is new brass clippings and offcuts in yellow composition (≈65% Cu / 35% Zn): clean, unalloyed beyond specification and free of iron, excessive oil and non-metallics. Consistent feed for brass rod and sheet production.

Specification

  • New yellow brass clippings ≈ 65% Cu
  • Clean, free of iron and attachments
  • Solder and plating within limits
  • Baled or bundled

Typical outlets

  • Brass mills
  • Rod production
  • Fastener manufacture
  • Ingot makers
Grade 04

Noble

ISRI New Yellow Brass Rod Ends

Detto ancheBrass rod ends · Brass rod

Noble is new yellow brass rod ends and cut-offs from machining and forging, clean and of known composition, free of iron and non-metallics. A premium, low-oxidation feed for rod and ingot producers.

Specification

  • New yellow brass rod ends ≈ 60-65% Cu
  • Clean, bright, single-composition
  • Free of iron, steel and oil
  • Drummed or bundled

Typical outlets

  • Brass rod mills
  • Ingot makers
  • Forging shops
  • Foundries
B

Red brass & bronze

5 qualità
Grade 05

Ebony

ISRI Red Brass / Composition Solids · ~85% Cu

Detto ancheGunmetal · Red brass

Ebony is red brass composition solids, the 85-5-5-5 family: nominally 85% copper with roughly 5% each of zinc, tin and lead. Sourced from valves, fittings, pump bodies and machinery bronze, red brass is the highest-copper brass grade and prices accordingly.

Specification

  • Composition ≈ 85% Cu / 5% Zn / 5% Sn / 5% Pb (C83600)
  • Valves, fittings, machinery bronze
  • Free of yellow brass dilution beyond limits
  • No iron, aluminium or manganese bronze

Typical outlets

  • Valve & fitting foundries
  • Bearing manufacture
  • Marine hardware
  • Pressure castings
Grade 06

Parch

ISRI Manganese Bronze Solids

Detto ancheManganese bronze · Propellers

Parch is manganese bronze solids: high-tensile brass propellers, marine fittings and heavy castings alloyed with manganese, iron and aluminium. Segregated from yellow and red brass and traded on its distinct composition.

Specification

  • Manganese bronze (high-tensile brass) solids
  • Segregated from yellow/red brass
  • Marine and heavy engineering castings
  • Composition by assay

Typical outlets

  • Marine foundries
  • High-tensile brass casting
  • Ingot makers
  • Bronze production
Grade 07

Engel

ISRI Machinery / Hard Brass Solids

Detto ancheHard brass · Machinery brass

Engel is machinery or hard brass solids: bearing and machinery bronzes carrying tin and lead, recovered from industrial equipment. Traded on assayed composition as a bearing-bronze and ingot feed.

Specification

  • Machinery / hard brass and bronze solids
  • Tin and lead bearing
  • Free of iron and non-metallics over limits
  • Composition by assay

Typical outlets

  • Bearing bronze production
  • Ingot makers
  • Foundries
  • Bushings
Grade 08

Grape

ISRI Cocks & Faucets (Mixed Plumbing Brass)

Detto ancheTaps and fittings · Plumbers brass · Mixed taps

Grape is cocks and faucets: mixed brass and bronze plumbing fittings — taps, valves and cocks — carrying chrome plating, and often steel and zinc attachments. Priced on recovered brass content after deduction for plating and inserts.

Specification

  • Mixed brass/bronze plumbing fittings
  • Chrome plating accounted for in price
  • Steel/zinc inserts deducted
  • Recovery by sample

Typical outlets

  • Secondary smelters
  • Ingot makers
  • Sweating plants
  • Foundries
Grade 09

Bronze & Gunmetal

Aluminium Bronze, Gunmetal, Phosphor Bronze — traded on assay

Detto ancheBronze · Phosphor bronze · Aluminium bronze

Some bronzes have no dedicated ISRI code word — aluminium bronze, gunmetal (LG2/LG4) and phosphor bronze among them. We trade these on laboratory assay and sample against the specific alloy, so their tin, aluminium, nickel and lead value is properly captured rather than lost in a mixed grade.

Specification

  • Aluminium bronze, gunmetal, phosphor bronze
  • No published ISRI code — priced on assay
  • Segregated by alloy where possible
  • Certificate of analysis per shipment

Typical outlets

  • Bronze foundries
  • Bearing manufacture
  • Marine casting
  • Ingot makers
C

Turnings & borings

3 qualità
Grade 10

Night

ISRI Yellow Brass Rod Turnings

Detto ancheBrass rod turnings · No.1 brass borings

Night is yellow brass rod turnings: machining swarf from brass rod and bar, in yellow composition, controlled for free iron, oil and moisture. Traded on assayed copper and zinc content with agreed deductions.

Specification

  • Yellow brass rod turnings ≈ 60-65% Cu
  • Oil & moisture deducted by agreement
  • Free iron controlled; magnet-cleaned
  • Loose or briquetted

Typical outlets

  • Brass ingot makers
  • Secondary smelters
  • Rod mills
  • Foundries
Grade 11

Nomad

ISRI Yellow Brass Turnings

Detto ancheBrass turnings · Brass swarf · No.2 brass borings

Nomad is mixed yellow brass turnings from castings and fittings, carrying more alloy variation than rod turnings. Sold subject to sample and melt recovery, with free iron and moisture controlled.

Specification

  • Mixed yellow brass turnings
  • Free iron and moisture controlled
  • Oil deducted by agreement
  • Loose or briquetted

Typical outlets

  • Brass ingot makers
  • Secondary smelters
  • Foundries
  • Alloy production
Grade 12

Erin

ISRI Machinery / Hard Brass Borings

Detto ancheHard brass borings · Gunmetal borings

Erin is machinery or hard brass borings: swarf from bearing and machinery bronze machining, tin and lead bearing. Traded on assay with deductions for oil, moisture and free iron.

Specification

  • Hard brass / bronze borings
  • Tin and lead bearing
  • Oil and moisture deducted
  • Composition by assay

Typical outlets

  • Bearing bronze production
  • Ingot makers
  • Secondary smelters
  • Foundries
D

Shell cases

2 qualità
Grade 13

Lace

ISRI Clean Fired Brass Shell Cases (No Primers)

Detto ancheBrass shell cases, no primers

Lace is clean fired 70/30 cartridge brass shell cases without primers: certified free of live ammunition and primers, iron and foreign material. Cartridge brass (C26000, 70% copper / 30% zinc) is prized for deep-draw quality and consistent composition.

Specification

  • Cartridge brass ≈ 70% Cu / 30% Zn (C26000)
  • Fired cases, primers removed, no live rounds
  • Free of steel, aluminium cases and debris
  • Certified for movement

Typical outlets

  • Cartridge brass strip
  • Deep-drawn components
  • Brass mills
  • Ingot
Grade 14

Lady

ISRI Clean Fired Brass Shell Cases (With Primers)

Detto ancheBrass shell cases, with primers

Lady is clean fired 70/30 cartridge brass shell cases with primers still in place: certified free of live rounds and bullets, iron and foreign material. Priced slightly below Lace to reflect primer removal, and moved under the same certification.

Specification

  • Cartridge brass ≈ 70% Cu / 30% Zn (C26000)
  • Fired cases with primers, no live rounds
  • Free of steel and foreign material
  • Certified for movement

Typical outlets

  • Cartridge brass strip
  • Brass mills
  • Ingot makers
  • Deep-drawn components
E

Tube & specialist

3 qualità
Grade 15

Melon

ISRI Brass Pipe

Detto ancheBrass pipe

Melon is brass pipe and tube in yellow composition (≈65% Cu / 35% Zn), free of plated, soldered and iron-attached material beyond specification limits. A clean tube feed for mills and ingot makers.

Specification

  • Yellow brass pipe/tube ≈ 65% Cu / 35% Zn
  • Free of solder joints and fittings beyond limits
  • Free of iron attachments
  • Clean, drained and cut to length

Typical outlets

  • Tube mills
  • Plumbing manufacture
  • Ingot makers
  • Rod mills
Grade 16

Pales

ISRI Brass Condenser Tubes

Detto ancheBrass condenser tubes

Pales is brass condenser and heat-exchanger tube, free of finning, iron tube-plates and excessive deposits beyond agreed limits. Admiralty compositions are declared and, where aluminium-brass, traded as Pallu.

Specification

  • Brass condenser / heat-exchanger tube
  • Free of iron tube-plates and finning over limits
  • Admiralty compositions declared
  • Drained and cut

Typical outlets

  • Tube mills
  • Heat exchangers
  • Ingot makers
  • Foundries
Grade 17

Pallu

ISRI Aluminium-Brass Condenser Tubes

Detto ancheAluminium-brass tubes

Pallu is aluminium-brass condenser tube (C68700 family), the corrosion-resistant marine and power-plant tube alloy carrying around 2% aluminium. Segregated from plain brass tube because the aluminium changes how it must be melted, and traded on declared composition.

Specification

  • Aluminium-brass tube (~76% Cu, ~2% Al, bal. Zn)
  • Segregated from plain brass condenser tube
  • Free of iron tube-plates over limits
  • Composition declared

Typical outlets

  • Tube mills
  • Marine heat exchangers
  • Ingot makers
  • Alloy production
F

Refined & semi-finished forms

1 qualità
Grade 18

Brass Ingot

Secondary Brass & Bronze Ingot (to specification)

Secondary brass and bronze ingot cast to specification — high-tensile brass, DZR, gunmetal (LG2) and standard yellow brass — with analysis per heat. A clean charge form for foundries and rod producers.

Specification

  • Brass/bronze ingot to agreed composition
  • High-tensile, DZR, LG2 and standard grades
  • Analysis certificate per heat
  • Palletised for container or bulk

Typical outlets

  • Foundries
  • Brass rod mills
  • Valve & fitting casting
  • Marine hardware

Domande frequenti

Ottone, spiegato

Acquistate bronzo fosforoso e bronzo oltre all'ottone?

Sì. L'ottone rosso e i solidi di composizione della famiglia 85-5-5-5 si trattano come Ebony, e il bronzo al manganese — eliche, accessori navali e getti pesanti — come Parch. Entrambi sono valutati sul contenuto di rame e per questo tenuti separati dall'ottone giallo.

Conviene separare l'ottone rosso da quello giallo prima della vendita?

Conviene. L'ottone giallo contiene circa il 65 % di rame, quello rosso circa l'85 %, e un carico misto viene pagato alla cifra più bassa. Separare getti, spezzoni di barra e ritagli in genere ripaga la movimentazione.

Acquistate trucioli di ottone?

Sì, purché privi di ferro, olio in eccesso e umidità. I trucioli sono classificati per quello che contengono realmente, quindi una lega dichiarata e una fotografia aiutano.

Tratti ottone?

Inviaci qualità, quantità, fotografie e luogo, e ti forniremo una quotazione ferma.

Chat on WhatsApp