Paslanmaz çelik

304, 316 ve nikel içeren karışık paslanmaz işleme konu ediyoruz — masif, talaş ve parçalanmış malzeme — doğrulanmış nikel, krom ve molibden içeriği üzerinden değerlenir.

Fiyat isteyin Kaliteleri görün

MohMet standardı

Paslanmaz, kimyası üzerinden değerlenir

Paslanmaz piyasasında değer kimyadır: nikel, krom ve molibden içeriği her yükün fiyatını belirler. Ostenitik 304 ve 316 ailelerini, 200 serisini, ayrıca talaş ve parçalanmış malzemeyi analizle doğrulayarak işleme konu ediyoruz. Paslanmaz, çeliği üzerinden değil alaşım birimleri üzerinden fiyatlandığı için demir dışı ticaretin içinde yer alır.

Bu sayfada Sabot 316 Solids Ultra Pekoe Zurik

Elinizde çıkacak malzeme mi var? Birleşik Krallık'ta paslanmaz çelik hurdası satmaya bakın.

Kalite kataloğu

İşlem gördüğümüz Paslanmaz çelik kaliteleri

paslanmaz çelik yelpazesinde 5 kalite ve form.

Austenitic solids

2 kalite

Grade 01

Sabot

ISRI 18-8 / 304 Stainless Solids · 8% Ni / 18% Cr

Şöyle de denir18/8 stainless · 304 stainless · Stainless solids

Sabot is 18-8 stainless steel clips and solids — type 304 sheet, plate and fabrication offcuts — containing a minimum 7% nickel and 16% chromium (nominal 8% Ni / 18% Cr), with molybdenum and copper held below 0.5%. Material is checked and segregated by analysis, free of other alloy families and attachments.

Specification

Type 304 / 18-8 austenitic solids
Ni min 7% (nominal 8%) · Cr min 16% (nominal 18%)
Max 0.5% Mo · max 0.5% Cu
XRF-verified, free of 400-series and mild steel

Typical outlets

Stainless melt shops
AOD furnace feed
New 304 production
Ni/Cr units

Grade 02

316 Solids

Marine-Grade Stainless · 10% Ni / 2% Mo (trade term)

Şöyle de denirMarine-grade stainless · 316

Type 316 stainless solids — the molybdenum-bearing marine and chemical-plant grade, nominally 16-18% chromium, 10-14% nickel and 2-3% molybdenum. There is no separate ISRI code word for 316: the moly premium means it is segregated from Sabot, verified and sold as a distinct, analysis-based shipment.

Specification

Cr 16-18% · Ni 10-14% · Mo 2-3%
Sheet, pipe, flange and fabrication solids
Segregated from 304 to protect the Mo premium
Full chemistry per shipment (trade term, not an ISRI code)

Typical outlets

316 melt production
Chemical plant fabrication
Marine hardware
Moly units

Turnings & shred

3 kalite

Grade 03

Ultra

ISRI Stainless Steel Turnings (18-8)

Şöyle de denirStainless turnings · Stainless swarf

Ultra is clean 18-8 stainless steel turnings: machining swarf from 304 (and, when declared, 316) production, minimum 7% nickel and 16% chromium, free of non-ferrous metals and excessive oil. Traded on assayed nickel content with agreed oil and moisture deductions.

Specification

18-8 stainless turnings, min 7% Ni / 16% Cr
304 and 316 streams kept separate
Oil & moisture deducted by agreement
Free of non-ferrous and carbide inserts

Typical outlets

Melt shop feed
Briquetted charge
Ni recovery
Foundries

Grade 04

Pekoe

ISRI 200-Series Stainless Solids

Şöyle de denir200-series stainless · Low-grade stainless

Pekoe is 200-series stainless steel solids: the manganese-substituted, lower-nickel austenitic grades, maximum 0.5% copper. Segregated from 300-series because of its different chemistry, and traded on verified analysis.

Specification

200-series austenitic solids
Lower Ni, manganese-substituted
Max 0.5% Cu
Segregated from 300-series, XRF-verified

Typical outlets

200-series melt production
Furnace feed
Ni/Cr/Mn units
Export melting

Grade 05

Zurik

ISRI Shredded Non-Ferrous, Predominantly Stainless

Şöyle de denirStainless shred

Zurik is shredded non-ferrous scrap, predominantly stainless steel, recovered from automobile fragmentizer downstream and sensor-sorting systems. Dense, clean and graded by grade (e.g. Zurik 90) for its stainless and nickel-bearing content, it is a favoured bulk furnace feed.

Specification

Sensor-sorted fragmentizer stainless
Graded by non-ferrous content (e.g. Zurik 90)
Ni assay basis; Cu and mild-steel limits
Dense, furnace-ready sizing

Typical outlets

Bulk furnace feed
300-series production
Ni/Cr recovery
Export melting

Sık sorulanlar